10T Self Aligning Pipe Welding Rotator , Pipe Welding Rotator With
1. Consist : One powered roller , One idler roller , Electric
2. Adjust way : Adjust the pipe diameter automatically with
diameter 12 - 110 inches
3. Voltage : 220V 60Hz 3Phase to Panama City Market / Just advise
us your voltage please.
4. Control Way : Remote hand control box with Speed Digital
5. Roller Material : Rubber / Steel / PU ( Polyurethane roller for
Nonferrous Metals ) all available.
6. Original : Our factory / Wuxi Success Machinery Equipment Co.,
Ltd / Pipe welding rotator
1. There are two emergency stop buttons fitted to the rotators, one
is located on the panel mounted on the drive unit, the second is
mounted on the pendant.
2. Pressing either of these two buttons will immediately bring the
welding rotators to a stop, and all controls will be locked.
3. After the hazard has been resolved and after checking the
machine can be safely operated again, the
emergency stop button needs to be released by twisting it in the
direction of the arrows printed on it.
Once this is done the reset button on the panel needs to be pressed
and will illuminate. Once the light
comes on, the rotators will not restart again, until a direction
button is pressed. Normal operation will now
Note: Either emergency stop button can be used to stop the machine but
operation can only restart again once the reset button is pressed.
Roller Diameter (mm)
Roller Width (mm)
Working Range (mm)
Roller Speed (m/h)
Motor Power (kw)
□ Moving wheels □ Wireless Control □ Remote Control
1. With moving wheels will be more convenient for several single
pipes butting welding.
2. It will be more convenient for inside / outside seam welding
using together with our column boom.
3. We also supply the welding manipulator and flux recovery
4. About 20 years professional experience of pipe welding rotator
engineer will supply you the service.
Details Control system and Brand
1. Inverter is from DANFOSS Brand
2. Motor is from CE INVERTEK Brand
3. Reducer is from Cable. Made in China.
4. Electric system is from SCHNEIDER.
More Questions Customers May Concerned
Q : What is your warranty and after sale service of the pipe
A : 1. We have many agence around the word,like European,America
and Middle East etc..
2. All our equipments with One Year Warranty time , fully test at
our work shop before delivery.
3. If you have any questions on the installation , you will get our
engineers respond within 24 hours.
1. Normally under 60 T model we use the Rubber material rollers ,
upper we use Steel material rollers.
2. If your work piece material is Nonferrous Metals , we suggest PU
3. Self-aligning welding rotator / Bolt adjsutment / Lead Screw
adjustment / Fit up rotators all available.
4. If your single pipe length more then 8M , then you should use 1
powered with 2 idlers to support.
5. All our pipe welding rotators have 20% over weight design, but
we suggest used on the safe rangs.
6. We have strong delivery team, including the Sea freight and Air
transportation. Door to door available.
7. Just advise me your desitination port then we will give you the
final CIF price.
DO NOT HESITATE ! JUST SEND US YOUR INQUIRY NOW.